Pleasant Township, Hancock County, OH Elevation & Topographic Map
Elevation
810 ft 245 m780 ft 240 m770 ft 235 m740 ft 225 m720 ft 220 m700 ft 215 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Pleasant Township, Hancock County sits at about 760 ft (230 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
760 ft 230 m
most residents: 730–770 ft
Lowest
700 ft 215 m
on the north side
Highest
810 ft 245 m
on the southeast side
Average
740 ft 225 m
all land inside township boundaries
Pleasant Township, Hancock County spans about 110 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 760 ft230 m |
| Highest point Inside township boundaries, on the southeast side | 810 ft245 m |
| Lowest point Inside township boundaries, on the north side | 700 ft215 m |
| Average of all land | 740 ft225 m |
Elevation profile, south to north
6.0 mi south to north through the middle of Pleasant Township, Hancock County.
Topographic Map
- Location
- Township in Hancock County, Ohio, United States
- Population
- 2,328 2024 est.
- Land area
- 36.5 sq mi
- Density
- 64 per sq mi
- Coordinates
- 41.1111° N, 83.7999° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Niagara River
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Allen Township, Hancock County800 ft
- Liberty Township, Hancock County790 ft
- Benton Ridge780 ft
- Blanchard Township, Hancock County780 ft
- McComb760 ft
- Pleasant Township, Hancock County760 ft
- Portage Township, Hancock County750 ft
- Belmore730 ft
- North Baltimore730 ft
- Hoytville710 ft
- Jackson Township, Wood County710 ft
Rankings by typical elevation
- Towns in Ohio1,967th highest of 2,572
- Towns in Hancock County27th highest of 28
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 700 ft at 41.1679° N, 83.8699° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.