North Baltimore, OH Elevation & Topographic Map
Elevation
760 ft 230 m740 ft 225 m730 ft 225 m720 ft 220 m700 ft 215 m690 ft 210 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
North Baltimore sits at about 730 ft (220 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
730 ft 220 m
most residents: 720–730 ft
Lowest
690 ft 210 m
on the northwest side
Highest
760 ft 230 m
on the east side
Average
730 ft 220 m
all land inside village limits
North Baltimore spans about 70 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 730 ft220 m |
| Highest point Inside village limits, on the east side | 760 ft230 m |
| Lowest point Inside village limits, on the northwest side | 690 ft210 m |
| Town center USGS map point for North Baltimore | 730 ft225 m |
| Average of all land | 730 ft220 m |
Topographic Map
- Location
- Village in Wood County, Ohio, United States
- Population
- 3,411 2024 est.
- Land area
- 2.5 sq mi
- Density
- 1,339 per sq mi
- Coordinates
- 41.1828° N, 83.6783° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Niagara River
- ZIP codes 1
- 45872
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Allen Township, Hancock County800 ft
- Van Buren760 ft
- Portage Township, Hancock County750 ft
- Bloomdale750 ft
- Bairdstown740 ft
- North Baltimore730 ft
- Henry Township730 ft
- Hoytville710 ft
- Bloom Township, Wood County710 ft
- Cygnet700 ft
- Jerry City690 ft
Rankings by typical elevation
- Towns in Ohio2,090th highest of 2,572
- Towns in Wood County4th highest of 46
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.