Bloomdale, OH Elevation & Topographic Map
Elevation
770 ft 235 m760 ft 235 m760 ft 230 m750 ft 230 m740 ft 225 m740 ft 225 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
Bloomdale sits at about 750 ft (225 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
750 ft 225 m
most residents: 740–750 ft
Lowest
740 ft 225 m
on the east side
Highest
750 ft 230 m
on the southeast side
Average
750 ft 225 m
all land inside village limits
Bloomdale is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 750 ft225 m |
| Highest point Inside village limits, on the southeast side | 750 ft230 m |
| Lowest point Inside village limits, on the east side | 740 ft225 m |
| Town center USGS map point for Bloomdale | 750 ft230 m |
| Airport (FZI) FAA airport elevation, the highest point of its runways, 7.9 mi east of the village limits | 752 ft229 m |
| Average of all land | 750 ft225 m |
Topographic Map
- Location
- Village in Wood County, Ohio, United States
- Population
- 650 2024 est.
- Land area
- 0.7 sq mi
- Density
- 977 per sq mi
- Coordinates
- 41.1726° N, 83.5563° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Niagara River
- Airport
- Donald P Miller (FZI) 752 ft
- ZIP codes 1
- 44817
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Arcadia800 ft
- Cass Township, Hancock County800 ft
- Washington Township, Hancock County780 ft
- Van Buren760 ft
- Perry Township, Wood County750 ft
- Bloomdale750 ft
- Bairdstown740 ft
- North Baltimore730 ft
- West Millgrove710 ft
- Bloom Township, Wood County710 ft
- Jerry City690 ft
Rankings by typical elevation
- Towns in Ohio2,020th highest of 2,572
- Towns in Wood County2nd highest of 46
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 730 ft at 41.1729° N, 83.5451° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.