Marion Township, Pike County, OH Elevation & Topographic Map

Elevation

1,020 ft 310 m920 ft 280 m870 ft 265 m770 ft 235 m670 ft 205 m620 ft 190 m

Contours every 100 ft, bold every 500 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Township area: Fades everything outside the official township boundaries (US Census).

Elevation Data

Marion Township, Pike County sits at about 700 ft (215 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

700 ft 215 m

most residents: 660–900 ft

Lowest

620 ft 190 m

on the northwest side

Highest

1,020 ft 310 m

on the south side

Average

790 ft 240 m

all land inside township boundaries

Marion Township, Pike County spans about 400 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	700 ft215 m
Highest point Inside township boundaries, on the south side	1,020 ft310 m
Lowest point Inside township boundaries, on the northwest side	620 ft190 m
Average of all land	790 ft240 m

Elevation profile, south to north

5.6 mi south to north through the middle of Marion Township, Pike County.

Topographic Map

Location: Township in Pike County, Ohio, United States
Population: 1,475 2024 est.
Land area: 22.6 sq mi
Density: 65 per sq mi
Coordinates: 38.9969° N, 82.8408° W
Time zone: Eastern UTC−5 / −4
Landform region: Appalachian Plateaus
Drains to: Ohio River → Mississippi River → Gulf of America

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Ohio2,220th highest of 2,572
Towns in Pike County14th highest of 19

Peaks and hills nearest, by height

Diffen Hill1,110 ft
Sand Hill, Pike County1,100 ft
Pine Knob, Pike County1,060 ft
Gravel Hill1,010 ft
Big Rock900 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.