Beaver, OH Elevation & Topographic Map

Elevation

910 ft 275 m850 ft 260 m820 ft 250 m750 ft 230 m690 ft 210 m660 ft 200 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Village area: Fades everything outside the official village limits (US Census).

Elevation Data

Beaver sits at about 680 ft (205 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

680 ft 205 m

most residents: 670–750 ft

Lowest

660 ft 200 m

on the southeast side

Highest

910 ft 275 m

on the north side

Average

720 ft 220 m

all land inside village limits

Beaver spans about 250 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	680 ft205 m
Highest point Inside village limits, on the north side	910 ft275 m
Lowest point Inside village limits, on the southeast side	660 ft200 m
Town center USGS map point for Beaver	690 ft210 m
Average of all land	720 ft220 m

Elevation profile, south to north

0.8 mi south to north through the town center.

Topographic Map

Location: Village in Pike County, Ohio, United States
Population: 438 2024 est.
Land area: 0.4 sq mi
Density: 1,123 per sq mi
Coordinates: 39.0306° N, 82.8243° W
Time zone: Eastern UTC−5 / −4
Landform region: Appalachian Plateaus
Drains to: Scioto River → Ohio River → Mississippi River → Gulf of America
ZIP codes 1: 45613

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Ohio2,302nd highest of 2,572
Towns in Pike County15th highest of 19

Peaks and hills nearest, by height

Sand Hill, Pike County1,100 ft
Pine Knob, Pike County1,060 ft
Weddington Hill1,050 ft
Gravel Hill1,010 ft
Big Rock900 ft

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.