Beaver Township, Noble County, OH Elevation & Topographic Map

Elevation
1,350 ft 410 m1,220 ft 370 m1,160 ft 350 m1,030 ft 315 m900 ft 275 m830 ft 255 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Beaver Township, Noble County sits at about 1,070 ft (325 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,070 ft 325 m
most residents: 910–1,210 ft
Lowest
830 ft 255 m
on the west side
Highest
1,350 ft 410 m
on the southeast side
Average
1,070 ft 325 m
all land inside township boundaries
Beaver Township, Noble County spans about 520 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,070 ft325 m |
| Highest point Inside township boundaries, on the southeast side | 1,350 ft410 m |
| Lowest point Inside township boundaries, on the west side | 830 ft255 m |
| Airport (6G5) FAA airport elevation, the highest point of its runways, 4.2 mi northeast of the township boundaries | 1,312 ft400 m |
| Average of all land | 1,070 ft325 m |
Elevation profile, south to north
5.8 mi south to north through the middle of Beaver Township, Noble County.
Topographic Map
- Location
- Township in Noble County, Ohio, United States
- Population
- 750 2024 est.
- Land area
- 29.2 sq mi + 0.1 sq mi water
- Density
- 26 per sq mi
- Coordinates
- 39.9132° N, 81.2782° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Wills Creek → Muskingum River → Ohio River → Mississippi River → Gulf of America
- Airport
- Barnesville/Bradfield (6G5) 1,312 ft
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Barnesville1,260 ft
- Warren Township1,250 ft
- Somerset Township1,210 ft
- Seneca Township, Noble County1,100 ft
- Beaver Township, Noble County1,070 ft
- Seneca Township, Monroe County1,060 ft
- Millwood Township990 ft
- Wayne Township, Noble County970 ft
- Batesville910 ft
- Quaker City880 ft
- Salesville870 ft
Rankings by typical elevation
- Towns in Ohio498th highest of 2,572
- Towns in Noble County4th highest of 21
Peaks and hills nearest, by height
- Cool Hill1,290 ft
- Beatty Knob1,260 ft
- Ranker Knob1,240 ft
- High Hill, Noble County1,220 ft
- Devils Knob1,110 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); FAA airport data; BTS time zones. All public domain.