Seneca Township, Noble County, OH Elevation & Topographic Map
Elevation
1,270 ft 385 m1,160 ft 355 m1,100 ft 335 m990 ft 305 m890 ft 270 m830 ft 255 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Seneca Township, Noble County sits at about 1,100 ft (335 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,100 ft 335 m
most residents: 980–1,150 ft
Lowest
830 ft 255 m
on the northwest side
Highest
1,270 ft 385 m
on the southeast side
Average
1,030 ft 315 m
all land inside township boundaries
Seneca Township, Noble County spans about 440 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,100 ft335 m |
| Highest point Inside township boundaries, on the southeast side | 1,270 ft385 m |
| Lowest point Inside township boundaries, on the northwest side | 830 ft255 m |
| Airport (I10) FAA airport elevation, the highest point of its runways, 4.5 mi southwest of the township boundaries | 879 ft268 m |
| Average of all land | 1,030 ft315 m |
Elevation profile, south to north
4.0 mi south to north through the middle of Seneca Township, Noble County.
Topographic Map
- Location
- Township in Noble County, Ohio, United States
- Population
- 413 2024 est.
- Land area
- 23.6 sq mi + 0.8 sq mi water
- Density
- 17 per sq mi
- Coordinates
- 39.8788° N, 81.4040° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Appalachian Plateaus
- Drains to
- Wills Creek → Muskingum River → Ohio River → Mississippi River → Gulf of America
- Airport
- Noble County (I10) 879 ft
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Summerfield1,180 ft
- Marion Township, Noble County1,120 ft
- Seneca Township, Noble County1,100 ft
- Seneca Township, Monroe County1,060 ft
- Center Township, Noble County990 ft
- Wayne Township, Noble County970 ft
- Sarahsville920 ft
- Richland Township, Guernsey County920 ft
- Batesville910 ft
- Senecaville890 ft
- Buffalo850 ft
Rankings by typical elevation
- Towns in Ohio366th highest of 2,572
- Towns in Noble County3rd highest of 21
Peaks and hills nearest, by height
- Beatty Knob1,260 ft
- Ranker Knob1,240 ft
- High Hill, Noble County1,220 ft
- Coffee Knob1,170 ft
- Browns Knob1,160 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); FAA airport data; BTS time zones. All public domain.