Antler, ND Elevation & Topographic Map
Elevation
1,560 ft 475 m1,550 ft 470 m1,540 ft 470 m1,540 ft 470 m1,530 ft 465 m1,520 ft 465 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Antler sits at about 1,530 ft (470 m) above sea level, the median height of all land inside city limits (too few residents to weight by).
Typical elevation (all land)
1,530 ft 470 m
few residents
Lowest
1,520 ft 465 m
on the northeast side
Highest
1,540 ft 470 m
on the south side
Average
1,530 ft 465 m
all land inside city limits
Antler is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 1,530 ft470 m |
| Highest point Inside city limits, on the south side | 1,540 ft470 m |
| Lowest point Inside city limits, on the northeast side | 1,520 ft465 m |
| Town center USGS map point for Antler | 1,540 ft470 m |
| Average of all land | 1,530 ft465 m |
Topographic Map
- Location
- City in Bottineau County, North Dakota, United States
- Population
- 22 2024 est.
- Land area
- 0.2 sq mi
- Density
- 118 per sq mi
- Coordinates
- 48.9709° N, 101.2824° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Canada
- ZIP codes 1
- 58711
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Eden Valley Township1,610 ft
- Wheaton Township1,590 ft
- Hoffman Township1,580 ft
- Renville Township1,540 ft
- Sherman Township1,540 ft
- Antler1,530 ft
- Antler Township1,530 ft
- Wayne Township1,500 ft
- Bentinck Township1,500 ft
- Westhope1,500 ft
- Richburg Township1,490 ft
Rankings by typical elevation
- Towns in North Dakota967th highest of 1,711
- Towns in Bottineau County21st highest of 54
Peaks and hills nearest, by height
- Boundary Butte2,520 ft
How we measure
- Typical elevation: the median height of all land inside the city limits; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.