Richmond County, NC Elevation & Topographic Map
Elevation
630 ft 190 m490 ft 150 m430 ft 130 m290 ft 90 m160 ft 45 m88 ft 27 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Richmond County averages about 340 ft (105 m) above sea level across all its land. Its ground runs from 88 ft on the southwest side to 630 ft on the north side.
Average elevation
340 ft 105 m
all land inside the county
Highest
630 ft 190 m
on the north side
Lowest
88 ft 27 m
on the southwest side
Richmond County spans about 542 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 340 ft105 m |
| Highest point Inside the county, on the north side | 630 ft190 m |
| Lowest point Inside the county, on the southwest side | 88 ft27 m |
Elevation profile, south to north
26 mi south to north through Rockingham.
Topographic Map
- Location
- County in North Carolina, United States
- Population
- 41,990 2024 est.
- Land area
- 473.7 sq mi + 6.0 sq mi water
- Density
- 89 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform regions
- Piedmont 76%, Coastal Plain 24%
- Drains to
- Atlantic Ocean
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Montgomery County520 ft
- Moore County420 ft
- Richmond County340 ft
- Anson County340 ft
- Scotland County260 ft
- Marlboro County, SC150 ft
Rankings by average elevation
- Counties in North Carolina54th highest of 100
- Counties in the United States2,558th highest of 3,151
Peaks and hills highest inside
- Coggins Hill400 ft
All 9 towns in Richmond County by typical elevation
- Norman610 ft
- Ellerbe530 ft
- Hoffman420 ft
- Dobbins Heights380 ft
- Hamlet340 ft
- Cordova290 ft
- Roberdel280 ft
- East Rockingham280 ft
- Rockingham270 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −1 ft at 34.9340° N, 79.8207° W, is in such a hollow or patch and is not counted.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.