Anson County, NC Elevation & Topographic Map

Topographic elevation map of Anson County, North Carolina, shaded from 91 ft on the southeast side to 630 ft on Gordon Mountain
Elevation
630 ft 190 m500 ft 150 m430 ft 130 m290 ft 90 m160 ft 50 m92 ft 28 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Anson County averages about 340 ft (105 m) above sea level across all its land. Its ground runs from 91 ft on the southeast side to 630 ft on Gordon Mountain.

Average elevation
340 ft 105 m
all land inside the county
Highest
630 ft 190 m
on Gordon Mountain
Lowest
91 ft 28 m
on the southeast side

Anson County spans about 539 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land340 ft105 m
Highest point
Inside the county, on Gordon Mountain (3DEP terrain model; no NGS survey height)
630 ft190 m
Lowest point
Inside the county, on the southeast side
91 ft28 m

Elevation profile, west to east

25 mi west to east through Wadesboro.

Topographic Map

Topographic elevation map of Anson County, North Carolina, shaded from 91 ft on the southeast side to 630 ft on Gordon Mountain
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in North Carolina, United States
Population
22,432 2024 est.
Land area
531.5 sq mi + 5.6 sq mi water
Density
42 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Piedmont
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 7 towns in Anson County by typical elevation
  1. Lilesville480 ft
  2. Peachland450 ft
  3. Wadesboro450 ft
  4. Morven360 ft
  5. Polkton350 ft
  6. Ansonville320 ft
  7. McFarlan290 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 91 ft at 34.8115° N, 79.9318° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.