Broome County, NY Elevation & Topographic Map

Topographic elevation map of Broome County, New York, shaded from 810 ft on the southwest side to 2,090 ft on the east side
Elevation
2,090 ft 635 m1,770 ft 540 m1,610 ft 490 m1,290 ft 390 m970 ft 295 m810 ft 245 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Broome County averages about 1,330 ft (405 m) above sea level across all its land. Its ground runs from 810 ft on the southwest side to 2,090 ft on the east side.

Average elevation
1,330 ft 405 m
all land inside the county
Highest
2,090 ft 635 m
on the east side
Lowest
810 ft 245 m
on the southwest side

Broome County spans about 1,280 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,330 ft405 m
Highest point
Inside the county, on the east side
2,090 ft635 m
Lowest point
Inside the county, on the southwest side
810 ft245 m

Elevation profile, west to east

35 mi west to east through Union.

Topographic Map

Topographic elevation map of Broome County, New York, shaded from 810 ft on the southwest side to 2,090 ft on the east side
County boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
County in New York, United States
Population
196,397 2024 est.
Land area
705.7 sq mi + 9.7 sq mi water
Density
278 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Appalachian Plateaus
Drains to
Atlantic Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Delaware County1,840 ft
  2. Cortland County1,480 ft
  3. Wayne County, PA1,480 ft
  4. Chenango County1,450 ft
  5. Susquehanna County, PA1,430 ft
  6. Broome County1,330 ft
  7. Tioga County1,260 ft

Rankings by average elevation

Peaks and hills highest inside

  • Page Pond Hill2,010 ft
  • Tarbell Hill1,900 ft
  • Ingraham Hill1,830 ft
  • Lucky Hill1,800 ft
  • Brady Hill1,790 ft
All 28 towns in Broome County by typical elevation
  1. Windsor1,450 ft
  2. Colesville1,390 ft
  3. Town of Binghamton1,340 ft
  4. Barker1,330 ft
  5. Nanticoke1,300 ft
  6. Maine1,280 ft
  7. Lisle1,250 ft
  8. Sanford1,250 ft
  9. Glen Aubrey1,100 ft
  10. Triangle1,080 ft
  11. Binghamton University1,020 ft
  12. Deposit1,000 ft
  13. Kirkwood980 ft
  14. Village of Lisle970 ft
  15. Fenton970 ft
  16. Whitney Point970 ft
  17. Vestal970 ft
  18. Village of Windsor960 ft
  19. Chenango960 ft
  20. Endwell940 ft
  21. Conklin900 ft
  22. Chenango Bridge900 ft
  23. Union890 ft
  24. Dickinson880 ft
  25. Binghamton870 ft
  26. Johnson City870 ft
  27. Port Dickinson860 ft
  28. Endicott850 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.