Belle Terre, NY Elevation & Topographic Map
Elevation
220 ft 65 m160 ft 50 m140 ft 40 m81 ft 25 m27 ft 8 m0 ft 0 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Village area
- Fades everything outside the official village limits (US Census).
Elevation Data
Belle Terre sits at about 140 ft (40 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
140 ft 40 m
most residents: 98–190 ft
Lowest
0 ft 0 m
at sea level on Port Jefferson Harbor
Highest
220 ft 65 m
on the southeast side
Average
120 ft 35 m
all land inside village limits
Belle Terre spans about 220 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 140 ft40 m |
| Highest point Inside village limits, on the southeast side | 220 ft65 m |
| Lowest point Where the land meets Port Jefferson Harbor | 0 ft0 m |
| Town center USGS map point for Belle Terre | 160 ft50 m |
| Airport (ISP) FAA airport elevation, the highest point of its runways, 11 mi south of the village limits | 99 ft30 m |
| Average of all land | 120 ft35 m |
Elevation profile, west to east
0.7 mi west to east through the town center.
Topographic Map
- Location
- Village in Suffolk County, New York, United States
- Population
- 788 2024 est.
- Land area
- 0.9 sq mi
- Density
- 890 per sq mi
- Coordinates
- 40.9598° N, 73.0679° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Long Island Sound
- Airport
- Long Island Mac Arthur (ISP) 99 ft
- ZIP codes 1
- 11777
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Port Jefferson Station180 ft
- Port Jefferson150 ft
- Terryville150 ft
- Mount Sinai150 ft
- Stony Brook University140 ft
- Miller Place140 ft
- East Setauket140 ft
- Belle Terre140 ft
- Poquott56 ft
- Old Field49 ft
- Setauket49 ft
Rankings by typical elevation
- Towns in New York1,810th highest of 2,097
- Towns in Suffolk County26th highest of 162
Peaks and hills nearest, by height
- South Beacon Mountain1,600 ft
- Mount Misery, Suffolk County180 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the village limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census village limits (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −3 ft at 40.9665° N, 73.0790° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.