Hamre Township, MN Elevation & Topographic Map

Elevation

1,230 ft 375 m1,220 ft 370 m1,220 ft 370 m1,210 ft 370 m1,200 ft 365 m1,190 ft 365 m

Contours every 200 ft, bold every 1,000 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Township area: Fades everything outside the official township boundaries (US Census).

Elevation Data

Hamre Township sits at about 1,210 ft (370 m) above sea level, the median height of all land inside township boundaries (too few residents to weight by).

Typical elevation (all land)

1,210 ft 370 m

few residents

Lowest

1,190 ft 365 m

on the southwest side

Highest

1,230 ft 375 m

on the east side

Average

1,210 ft 370 m

all land inside township boundaries

Hamre Township spans about 40 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical (all land) Median of all land; too few residents to weight by	1,210 ft370 m
Highest point Inside township boundaries, on the east side	1,230 ft375 m
Lowest point Inside township boundaries, on the southwest side	1,190 ft365 m
Average of all land	1,210 ft370 m

Topographic Map

Location: Township in Beltrami County, Minnesota, United States
Population: 20 2024 est.
Land area: 35.9 sq mi
Density: 0.6 per sq mi
Coordinates: 48.2526° N, 95.4540° W
Time zone: Central UTC−6 / −5
Landform region: Central Lowland
Drains to: Red Lake River → Red River → Canada
ZIP codes 1: 56727

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Nearby towns by typical elevation

Minnie Township1,230 ft
Steenerson Township1,230 ft
Spruce Grove Township, Beltrami County1,220 ft
Hamre Township1,210 ft
Benville Township1,200 ft
Lee Township, Beltrami County1,190 ft
Valley Township1,180 ft
Reiner Township1,180 ft
Grygla1,170 ft
Espelie Township1,170 ft
Eckvoll Township1,160 ft

Rankings by typical elevation

Towns in Minnesota1,138th highest of 2,692
Towns in Beltrami County48th highest of 54

How we measure

Typical elevation: the median height of all land inside the township boundaries; too few residents live here to weight by people.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.