Hunters Hollow, KY Elevation & Topographic Map

Elevation

540 ft 165 m530 ft 165 m530 ft 160 m520 ft 160 m510 ft 155 m510 ft 155 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
City area: Fades everything outside the official city limits (US Census).

Elevation Data

Hunters Hollow sits at about 520 ft (160 m) above sea level, the median height of all land inside city limits (too few residents to weight by).

Typical elevation (all land)

520 ft 160 m

few residents

Lowest

510 ft 155 m

on the south side

Highest

530 ft 160 m

at the foot of the South Park Hills

Average

520 ft 160 m

all land inside city limits

Hunters Hollow is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.

Figure	Elevation
Typical (all land) Median of all land; too few residents to weight by	520 ft160 m
Highest point Inside city limits, at the foot of the South Park Hills	530 ft160 m
Lowest point Inside city limits, on the south side	510 ft155 m
Town center USGS map point for Hunters Hollow	520 ft160 m
Airport (SDF) FAA airport elevation, the highest point of its runways, 6.7 mi north of the city limits	501 ft153 m
Average of all land	520 ft160 m

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

How we measure

Typical elevation: the median height of all land inside the city limits; too few residents live here to weight by people.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.