Garrard County, KY Elevation & Topographic Map

Topographic elevation map of Garrard County, Kentucky, shaded from 510 ft on the northwest side to 1,410 ft on the southeast side
Elevation
1,410 ft 430 m1,180 ft 360 m1,070 ft 325 m850 ft 260 m620 ft 190 m510 ft 155 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Garrard County averages about 930 ft (285 m) above sea level across all its land. Its ground runs from 510 ft on the northwest side to 1,410 ft on the southeast side.

Average elevation
930 ft 285 m
all land inside the county
Highest
1,410 ft 430 m
on the southeast side
Lowest
510 ft 155 m
on the northwest side

Garrard County spans about 900 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land930 ft285 m
Highest point
Inside the county, on the southeast side
1,410 ft430 m
Lowest point
Inside the county, on the northwest side
510 ft155 m

Elevation profile, south to north

11 mi south to north through Lancaster.

Topographic Map

Topographic elevation map of Garrard County, Kentucky, shaded from 510 ft on the northwest side to 1,410 ft on the southeast side
County boundary (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
County in Kentucky, United States
Population
18,040 2024 est.
Land area
229.9 sq mi + 4.0 sq mi water
Density
78 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Interior Low Plateaus
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

The one town in Garrard County
  1. Lancaster1,000 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.