Reno County, KS Elevation & Topographic Map

Topographic elevation map of Reno County, Kansas, shaded from 1,410 ft on the southeast side to 1,830 ft on the west side
Elevation
1,830 ft 555 m1,720 ft 525 m1,670 ft 510 m1,570 ft 475 m1,460 ft 445 m1,410 ft 430 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Reno County averages about 1,600 ft (490 m) above sea level across all its land. Its ground runs from 1,410 ft on the southeast side to 1,830 ft on the west side.

Average elevation
1,600 ft 490 m
all land inside the county
Highest
1,830 ft 555 m
on the west side
Lowest
1,410 ft 430 m
on the southeast side

Reno County spans about 420 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,600 ft490 m
Highest point
Inside the county, on the west side
1,830 ft555 m
Lowest point
Inside the county, on the southeast side
1,410 ft430 m

Elevation profile, west to east

42 mi west to east through Hutchinson.

Topographic Map

Topographic elevation map of Reno County, Kansas, shaded from 1,410 ft on the southeast side to 1,830 ft on the west side
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Kansas, United States
Population
61,417 2024 est.
Land area
1,255.3 sq mi + 16.8 sq mi water
Density
49 per sq mi
Time zone
Central UTC−6 / −5
Landform regions
Great Plains 72%, Central Lowland 28%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 47 towns in Reno County by typical elevation
  1. Hayes Township, Reno County1,770 ft
  2. Turon1,760 ft
  3. Miami Township, Reno County1,760 ft
  4. Grove Township, Reno County1,740 ft
  5. Sylvia Township1,740 ft
  6. Sylvia1,730 ft
  7. Huntsville Township1,720 ft
  8. Walnut Township, Reno County1,710 ft
  9. The Highlands1,690 ft
  10. Langdon1,690 ft
  11. Plevna1,690 ft
  12. Langdon Township1,690 ft
  13. Plevna Township1,690 ft
  14. Bell Township1,680 ft
  15. Medford Township1,680 ft
  16. Abbyville1,650 ft
  17. Westminster Township1,650 ft
  18. Enterprise Township, Reno County1,650 ft
  19. Loda Township1,630 ft
  20. Partridge1,610 ft
  21. Arlington Township1,610 ft
  22. Arlington1,610 ft
  23. Center Township, Reno County1,600 ft
  24. Salt Creek Township1,600 ft
  25. Nickerson1,590 ft
  26. Roscoe Township1,590 ft
  27. Grant Township, Reno County1,590 ft
  28. Clay Township1,580 ft
  29. Pretty Prairie1,570 ft
  30. Albion Township1,570 ft
  31. Medora Township1,570 ft
  32. Lincoln Township, Reno County1,560 ft
  33. Willowbrook1,560 ft
  34. Troy Township1,550 ft
  35. Yoder1,550 ft
  36. Reno Township1,540 ft
  37. Hutchinson1,530 ft
  38. South Hutchinson1,530 ft
  39. Yoder Township1,530 ft
  40. Castleton Township1,510 ft
  41. Valley Township, Reno County1,500 ft
  42. Buhler1,490 ft
  43. Little River Township1,480 ft
  44. Haven Township1,480 ft
  45. Haven1,470 ft
  46. Sumner Township1,470 ft
  47. Ninnescah Township, Reno County1,440 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.