Whitestown, IN Elevation & Topographic Map

Elevation

970 ft 295 m950 ft 290 m950 ft 290 m930 ft 285 m910 ft 280 m910 ft 275 m

Contours every 200 ft, bold every 1,000 ft

USGS 3DEP · U.S. Census Bureau

⤓ Download this map

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Whitestown sits at about 930 ft (285 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation

930 ft 285 m

most residents: 920–940 ft

Lowest

910 ft 275 m

on the southeast side

Highest

970 ft 295 m

on the southwest side

Average

930 ft 285 m

all land inside town limits

Whitestown spans about 60 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

Figure	Elevation
Typical Where people live: half of residents higher, half lower	930 ft285 m
Highest point Inside town limits, on the southwest side	970 ft295 m
Lowest point Inside town limits, on the southeast side	910 ft275 m
Town center USGS map point for Whitestown	940 ft285 m
Airport (6I4) FAA airport elevation, the highest point of its runways, 2.4 mi west of the town limits	959 ft292 m
Average of all land	930 ft285 m

Elevation profile, south to north

6.0 mi south to north through the town center.

Topographic Map

Location: Town in Boone County, Indiana, United States
Population: 14,564 2024 est.
Land area: 16.2 sq mi
Density: 901 per sq mi
Coordinates: 39.9973° N, 86.3458° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Eagle Creek → White River → Wabash River → Ohio River → Mississippi River → Gulf of America
Airport: Boone County (6I4) 959 ft
ZIP codes 3: 46052 46075 46077

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

Rankings by typical elevation

Towns in Indiana261st highest of 1,977
Towns in Boone County11th highest of 17

How we measure

Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.