Ulen, IN Elevation & Topographic Map

Elevation

960 ft 295 m950 ft 290 m950 ft 290 m940 ft 285 m930 ft 285 m930 ft 285 m

Contours every 40 ft, bold every 200 ft

USGS 3DEP · U.S. Census Bureau

How to use this mapviews, tools and data

Elevation: Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite: A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D: Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere: The exact elevation of that spot in ft and m.
Measure: Pick two points for the climb, descent and grade along a straight line.
Town area: Fades everything outside the official town limits (US Census).

Elevation Data

Ulen sits at about 940 ft (285 m) above sea level, the median height of all land inside town limits (too few residents to weight by).

Typical elevation (all land)

940 ft 285 m

few residents

Lowest

930 ft 285 m

on the northwest side

Highest

950 ft 290 m

near the middle

Average

940 ft 285 m

all land inside town limits

Ulen is nearly flat: its ground varies by only about 20 ft, so the figures below sit close together.

Figure	Elevation
Typical (all land) Median of all land; too few residents to weight by	940 ft285 m
Highest point Inside town limits, near the middle	950 ft290 m
Lowest point Inside town limits, on the northwest side	930 ft285 m
Town center USGS map point for Ulen	950 ft290 m
Airport (6I4) FAA airport elevation, the highest point of its runways, 3.9 mi south of the town limits	959 ft292 m
Average of all land	940 ft285 m

Location: Town in Boone County, Indiana, United States
Population: 115 2024 est.
Land area: 0.2 sq mi
Density: 511 per sq mi
Coordinates: 40.0631° N, 86.4644° W
Time zone: Eastern UTC−5 / −4
Landform region: Central Lowland
Drains to: Sugar Creek → Wabash River → Ohio River → Mississippi River → Gulf of America
Airport: Boone County (6I4) 959 ft
ZIP codes 1: 46052

⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

How we measure

Typical elevation: the median height of all land inside the town limits; too few residents live here to weight by people.
Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.