Sharpsville, IN Elevation & Topographic Map
Elevation
900 ft 275 m890 ft 270 m890 ft 270 m880 ft 270 m870 ft 265 m870 ft 265 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Sharpsville sits at about 880 ft (265 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
880 ft 265 m
most residents: 870–880 ft
Lowest
870 ft 265 m
on the southeast side
Highest
880 ft 270 m
on the west side
Average
880 ft 265 m
all land inside town limits
Sharpsville is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 880 ft265 m |
| Highest point Inside town limits, on the west side | 880 ft270 m |
| Lowest point Inside town limits, on the southeast side | 870 ft265 m |
| Town center USGS map point for Sharpsville | 880 ft270 m |
| Average of all land | 880 ft265 m |
Topographic Map
- Location
- Town in Tipton County, Indiana, United States
- Population
- 540 2024 est.
- Land area
- 0.2 sq mi
- Density
- 2,348 per sq mi
- Coordinates
- 40.3795° N, 86.0886° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Wildcat Creek → Wabash River → Ohio River → Mississippi River → Gulf of America
- ZIP codes 1
- 46068
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Goldsmith910 ft
- Prairie Township, Tipton County900 ft
- Sharpsville880 ft
- Liberty Township, Tipton County870 ft
- Tipton870 ft
- Windfall City860 ft
- Wildcat Township860 ft
- Hemlock860 ft
- Taylor Township850 ft
- Center840 ft
- Harrison Township, Howard County840 ft
Rankings by typical elevation
- Towns in Indiana428th highest of 1,977
- Towns in Tipton County5th highest of 12
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.