Goldsmith, IN Elevation & Topographic Map

Elevation
930 ft 285 m920 ft 280 m920 ft 280 m910 ft 280 m900 ft 275 m900 ft 275 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Goldsmith sits at about 910 ft (275 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
910 ft 275 m
most residents: 900–910 ft
Lowest
900 ft 275 m
on the southwest side
Highest
910 ft 280 m
near the middle
Average
910 ft 275 m
all land inside the CDP boundary
Goldsmith is nearly flat: its ground varies by only about 10 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 910 ft275 m |
| Highest point Inside the CDP boundary, near the middle | 910 ft280 m |
| Lowest point Inside the CDP boundary, on the southwest side | 900 ft275 m |
| Town center USGS map point for Goldsmith | 910 ft275 m |
| Airport (5I4) FAA airport elevation, the highest point of its runways, 8.1 mi southwest of the CDP boundary | 936 ft285 m |
| Average of all land | 910 ft275 m |
Topographic Map
- Location
- Unincorporated community (census-designated place) in Tipton County, Indiana, United States
- Population
- 125 2020 Census
- Land area
- 0.2 sq mi
- Density
- 607 per sq mi
- Coordinates
- 40.2895° N, 86.1492° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Cicero Creek → White River → Wabash River → Ohio River → Mississippi River → Gulf of America
- Airport
- Sheridan (5I4) 936 ft
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Sugar Creek Township, Clinton County930 ft
- Scircleville930 ft
- Kempton930 ft
- Jefferson Township, Tipton County910 ft
- Goldsmith910 ft
- Prairie Township, Tipton County900 ft
- Sharpsville880 ft
- Liberty Township, Tipton County870 ft
- Cicero Township870 ft
- Tipton870 ft
- Atlanta860 ft
Rankings by typical elevation
- Towns in Indiana320th highest of 1,977
- Towns in Tipton County3rd highest of 12
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Goldsmith is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); FAA airport data; BTS time zones. All public domain.