Randolph County, IN Elevation & Topographic Map

Topographic elevation map of Randolph County, Indiana, shaded from 920 ft on the northwest side to 1,240 ft on the southeast side
Elevation
1,240 ft 380 m1,160 ft 355 m1,120 ft 340 m1,040 ft 320 m960 ft 295 m920 ft 280 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Randolph County averages about 1,090 ft (330 m) above sea level across all its land. Its ground runs from 920 ft on the northwest side to 1,240 ft on the southeast side.

Average elevation
1,090 ft 330 m
all land inside the county
Highest
1,240 ft 380 m
on the southeast side
Lowest
920 ft 280 m
on the northwest side

Randolph County spans about 320 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,090 ft330 m
Highest point
Inside the county, on the southeast side
1,240 ft380 m
Lowest point
Inside the county, on the northwest side
920 ft280 m

Elevation profile, south to north

21 mi south to north through White River Township, Randolph County.

Topographic Map

Topographic elevation map of Randolph County, Indiana, shaded from 920 ft on the northwest side to 1,240 ft on the southeast side
County boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
County in Indiana, United States
Population
24,337 2024 est.
Land area
452.4 sq mi + 0.9 sq mi water
Density
54 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Central Lowland
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

Neighboring counties sharing a border, by average

  1. Randolph County1,090 ft
  2. Henry County1,050 ft
  3. Wayne County1,050 ft
  4. Darke County, OH1,040 ft
  5. Delaware County940 ft
  6. Jay County930 ft

Rankings by average elevation

All 24 towns in Randolph County by typical elevation
  1. Greensfork Township1,180 ft
  2. Spartanburg1,180 ft
  3. Modoc1,170 ft
  4. Lynn1,170 ft
  5. Washington Township, Randolph County1,170 ft
  6. Union Township, Randolph County1,150 ft
  7. Losantville1,140 ft
  8. Wayne Township, Randolph County1,100 ft
  9. Union City1,100 ft
  10. White River Township, Randolph County1,090 ft
  11. Winchester1,090 ft
  12. Saratoga1,050 ft
  13. Jackson Township, Randolph County1,040 ft
  14. Farmland1,040 ft
  15. Ward Township1,030 ft
  16. Stoney Creek Township1,030 ft
  17. Monroe Township, Randolph County1,030 ft
  18. Parker City1,020 ft
  19. Windsor1,020 ft
  20. Ridgeville990 ft
  21. Franklin Township, Randolph County990 ft
  22. Fairview960 ft
  23. Green Township, Randolph County960 ft
  24. Albany partly940 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 830 ft at 40.2843° N, 85.0212° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.