Fairview, IN Elevation & Topographic Map

Topographic elevation map of Fairview, Indiana, shaded from 930 ft on the southwest side to 990 ft on the northeast side
Elevation
990 ft 300 m970 ft 295 m970 ft 295 m950 ft 290 m940 ft 285 m930 ft 285 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Fairview sits at about 960 ft (295 m) above sea level, the median height of all land inside the CDP boundary (too few residents to weight by).

Typical elevation (all land)
960 ft 295 m
few residents
Lowest
930 ft 285 m
on the southwest side
Highest
990 ft 300 m
on the northeast side
Average
960 ft 295 m
all land inside the CDP boundary

Fairview spans about 60 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical (all land)
Median of all land; too few residents to weight by
960 ft295 m
Highest point
Inside the CDP boundary, on the northeast side
990 ft300 m
Lowest point
Inside the CDP boundary, on the southwest side
930 ft285 m
Town center
USGS map point for Fairview
960 ft295 m
Average of all land960 ft295 m

Elevation profile, south to north

0.5 mi south to north through the town center.

Topographic Map

Topographic elevation map of Fairview, Indiana, shaded from 930 ft on the southwest side to 990 ft on the northeast side
CDP boundary (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
Unincorporated community (census-designated place) in Randolph County, Indiana, United States
Population
92 2020 Census
Land area
0.5 sq mi
Density
172 per sq mi
Coordinates
40.2981° N, 85.1952° W
Time zone
Eastern UTC−5 / −4
Landform region
Central Lowland
Drains to
Mississinewa River → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

How we measure
  • Typical elevation: the median height of all land inside the CDP boundary; too few residents live here to weight by people.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Fairview is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); BTS time zones. All public domain.