Millgrove, IN Elevation & Topographic Map
Elevation
950 ft 290 m940 ft 285 m930 ft 285 m930 ft 280 m920 ft 280 m910 ft 280 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Millgrove sits at about 930 ft (285 m) above sea level, the median height of all land inside the CDP boundary (too few residents to weight by).
Typical elevation (all land)
930 ft 285 m
few residents
Lowest
910 ft 280 m
on the south side
Highest
950 ft 290 m
on the southeast side
Average
930 ft 285 m
all land inside the CDP boundary
Millgrove spans about 40 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 930 ft285 m |
| Highest point Inside the CDP boundary, on the southeast side | 950 ft290 m |
| Lowest point Inside the CDP boundary, on the south side | 910 ft280 m |
| Town center USGS map point for Millgrove | 940 ft285 m |
| Average of all land | 930 ft285 m |
Topographic Map
- Location
- Unincorporated community (census-designated place) in Blackford County, Indiana, United States
- Population
- 13 2020 Census
- Land area
- 0.2 sq mi
- Density
- 65 per sq mi
- Coordinates
- 40.4084° N, 85.2750° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Mississinewa River → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Richland Township, Jay County950 ft
- Dunkirk950 ft
- Niles Township940 ft
- Albany940 ft
- Millgrove930 ft
- Jackson Township, Blackford County920 ft
- Hartford City910 ft
- Eaton910 ft
- Union Township, Delaware County910 ft
- Licking Township910 ft
- Knox Township910 ft
Rankings by typical elevation
- Towns in Indiana260th highest of 1,977
- Towns in Blackford Countyhighest of 9
Peaks and hills nearest, by height
- Twin Hills940 ft
How we measure
- Typical elevation: the median height of all land inside the CDP boundary; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Millgrove is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); BTS time zones. All public domain.