Jackson Township, Blackford County, IN Elevation & Topographic Map
Elevation
960 ft 290 m940 ft 285 m930 ft 285 m910 ft 275 m890 ft 270 m880 ft 265 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Jackson Township, Blackford County sits at about 920 ft (280 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
920 ft 280 m
most residents: 890–940 ft
Lowest
880 ft 265 m
on the northeast side
Highest
960 ft 290 m
on the west side
Average
910 ft 280 m
all land inside township boundaries
Jackson Township, Blackford County spans about 80 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 920 ft280 m |
| Highest point Inside township boundaries, on the west side | 960 ft290 m |
| Lowest point Inside township boundaries, on the northeast side | 880 ft265 m |
| Average of all land | 910 ft280 m |
Elevation profile, south to north
6.9 mi south to north through the middle of Jackson Township, Blackford County.
Topographic Map
- Location
- Township in Blackford County, Indiana, United States
- Population
- 1,197 2024 est.
- Land area
- 45.6 sq mi + 0.1 sq mi water
- Density
- 26 per sq mi
- Coordinates
- 40.4280° N, 85.2671° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Salamonie River → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Richland Township, Jay County950 ft
- Dunkirk950 ft
- Niles Township940 ft
- Millgrove930 ft
- Jackson Township, Blackford County920 ft
- Hartford City910 ft
- Eaton910 ft
- Union Township, Delaware County910 ft
- Licking Township910 ft
- Knox Township910 ft
- Pennville880 ft
Rankings by typical elevation
- Towns in Indiana291st highest of 1,977
- Towns in Blackford County2nd highest of 9
Peaks and hills nearest, by height
- Twin Hills940 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 870 ft at 40.4635° N, 85.2090° W, is in such a hollow or patch and is not counted.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.