Harmony, IN Elevation & Topographic Map
Elevation
710 ft 215 m690 ft 210 m680 ft 210 m660 ft 200 m640 ft 195 m630 ft 195 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Harmony sits at about 680 ft (205 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
680 ft 205 m
most residents: 670–690 ft
Lowest
630 ft 195 m
on the south side
Highest
710 ft 215 m
on the north side
Average
670 ft 205 m
all land inside town limits
Harmony spans about 80 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 680 ft205 m |
| Highest point Inside town limits, on the north side | 710 ft215 m |
| Lowest point Inside town limits, on the south side | 630 ft195 m |
| Average of all land | 670 ft205 m |
Elevation profile, south to north
1.0 mi south to north through the middle of Harmony.
Topographic Map
- Location
- Town in Clay County, Indiana, United States
- Population
- 673 2024 est.
- Land area
- 0.8 sq mi
- Density
- 819 per sq mi
- Coordinates
- 39.5353° N, 87.0740° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Eel River → White River → Wabash River → Ohio River → Mississippi River → Gulf of America
- ZIP codes 2
- 47834 47853
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Washington Township, Putnam County690 ft
- Carbon690 ft
- Van Buren Township, Clay County680 ft
- Knightsville680 ft
- Harmony680 ft
- Brazil670 ft
- Brazil Township670 ft
- Jackson Township, Clay County650 ft
- Dick Johnson Township630 ft
- Posey Township630 ft
- Billtown610 ft
Rankings by typical elevation
- Towns in Indiana1,363rd highest of 1,977
- Towns in Clay County4th highest of 26
Peaks and hills nearest, by height
- Bald Hill, Putnam County870 ft
- Keiser Hill, Owen County800 ft
- Drake Hill690 ft
- Vinegar Hill670 ft
- Cromwell Hill660 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.