Billtown, IN Elevation & Topographic Map

Elevation
640 ft 195 m620 ft 190 m610 ft 185 m600 ft 185 m580 ft 180 m580 ft 175 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Billtown sits at about 610 ft (185 m) above sea level, the median height of all land inside the CDP boundary (too few residents to weight by).
Typical elevation (all land)
610 ft 185 m
few residents
Lowest
580 ft 175 m
on the west side
Highest
640 ft 195 m
on the east side
Average
610 ft 185 m
all land inside the CDP boundary
Billtown spans about 60 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 610 ft185 m |
| Highest point Inside the CDP boundary, on the east side | 640 ft195 m |
| Lowest point Inside the CDP boundary, on the west side | 580 ft175 m |
| Town center USGS map point for Billtown | 620 ft190 m |
| Airport (HUF) FAA airport elevation, the highest point of its runways, 7.0 mi southwest of the CDP boundary | 589 ft180 m |
| Average of all land | 610 ft185 m |
Elevation profile, west to east
1.1 mi west to east through the town center.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Clay County, Indiana, United States
- Population
- 46 2020 Census
- Land area
- 0.4 sq mi
- Density
- 108 per sq mi
- Coordinates
- 39.5100° N, 87.1861° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Wabash River → Ohio River → Mississippi River → Gulf of America
- Airport
- Terre Haute Regional (HUF) 589 ft
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Knightsville680 ft
- Brazil670 ft
- Brazil Township670 ft
- Jackson Township, Clay County650 ft
- Staunton640 ft
- Dick Johnson Township630 ft
- Posey Township630 ft
- Billtown610 ft
- Cloverland600 ft
- Seelyville590 ft
- Nevins Township590 ft
Rankings by typical elevation
- Towns in Indiana1,587th highest of 1,977
- Towns in Clay County18th highest of 26
Peaks and hills nearest, by height
- Drake Hill690 ft
- Vinegar Hill670 ft
- Cromwell Hill660 ft
- Trimmer Hill620 ft
- Pottsville Hill600 ft
How we measure
- Typical elevation: the median height of all land inside the CDP boundary; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Billtown is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); FAA airport data; BTS time zones. All public domain.