Bloomingdale, IN Elevation & Topographic Map
Elevation
660 ft 205 m650 ft 200 m640 ft 195 m630 ft 190 m610 ft 185 m600 ft 185 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Bloomingdale sits at about 640 ft (195 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
640 ft 195 m
most residents: 610–650 ft
Lowest
600 ft 185 m
on the south side
Highest
660 ft 205 m
on the southwest side
Average
630 ft 195 m
all land inside town limits
Bloomingdale spans about 60 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 640 ft195 m |
| Highest point Inside town limits, on the southwest side | 660 ft205 m |
| Lowest point Inside town limits, on the south side | 600 ft185 m |
| Town center USGS map point for Bloomingdale | 640 ft195 m |
| Average of all land | 630 ft195 m |
Elevation profile, south to north
1.1 mi south to north through the town center.
Topographic Map
- Location
- Town in Parke County, Indiana, United States
- Population
- 274 2024 est.
- Land area
- 0.6 sq mi
- Density
- 471 per sq mi
- Coordinates
- 39.8334° N, 87.2497° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Wabash River → Ohio River → Mississippi River → Gulf of America
- ZIP codes 1
- 47832
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Marshall700 ft
- Washington Township, Parke County700 ft
- Rockville690 ft
- Adams Township, Parke County690 ft
- Sugar Creek Township, Parke County670 ft
- Penn Township, Parke County640 ft
- Bloomingdale640 ft
- Liberty Township, Parke County630 ft
- Judson610 ft
- Reserve Township510 ft
- Montezuma500 ft
Rankings by typical elevation
- Towns in Indiana1,514th highest of 1,977
- Towns in Parke County11th highest of 22
Peaks and hills nearest, by height
- Truax Hill820 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.