Adams Township, Parke County, IN Elevation & Topographic Map
Elevation
750 ft 230 m690 ft 210 m670 ft 205 m610 ft 185 m560 ft 170 m530 ft 160 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Adams Township, Parke County sits at about 690 ft (210 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
690 ft 210 m
most residents: 650–730 ft
Lowest
530 ft 160 m
on the south side
Highest
750 ft 230 m
on the southeast side
Average
650 ft 195 m
all land inside township boundaries
Adams Township, Parke County spans about 220 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 690 ft210 m |
| Highest point Inside township boundaries, on the southeast side | 750 ft230 m |
| Lowest point Inside township boundaries, on the south side | 530 ft160 m |
| Average of all land | 650 ft195 m |
Elevation profile, south to north
6.0 mi south to north through the middle of Adams Township, Parke County.
Topographic Map
- Location
- Township in Parke County, Indiana, United States
- Population
- 5,185 2024 est.
- Land area
- 55.8 sq mi + 0.3 sq mi water
- Density
- 93 per sq mi
- Coordinates
- 39.7630° N, 87.2298° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Central Lowland
- Drains to
- Big Raccoon Creek → Wabash River → Ohio River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Marshall700 ft
- Washington Township, Parke County700 ft
- Rockville690 ft
- Adams Township, Parke County690 ft
- Penn Township, Parke County640 ft
- Bloomingdale640 ft
- Judson610 ft
- Wabash Township, Parke County530 ft
- Mecca520 ft
- Reserve Township510 ft
- Montezuma500 ft
Rankings by typical elevation
- Towns in Indiana1,283rd highest of 1,977
- Towns in Parke County8th highest of 22
Peaks and hills nearest, by height
- Bald Hill, Putnam County870 ft
- Truax Hill820 ft
- Pottsville Hill600 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.