Pike County, GA Elevation & Topographic Map

Topographic elevation map of Pike County, Georgia, shaded from 650 ft on the southwest side to 1,271 ft on Indian Grave Mountain
Elevation
1,270 ft 385 m1,120 ft 340 m1,040 ft 315 m880 ft 270 m730 ft 220 m650 ft 200 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Pike County averages about 810 ft (245 m) above sea level across all its land. Its ground runs from 650 ft on the southwest side to 1,271 ft on Indian Grave Mountain.

Average elevation
810 ft 245 m
all land inside the county
Highest
1,271 ft 387 m
on Indian Grave Mountain
Lowest
650 ft 200 m
on the southwest side

Pike County spans about 620 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land810 ft245 m
Highest point
Inside the county, on Indian Grave Mountain (NGS survey height)
1,271 ft387 m
Lowest point
Inside the county, on the southwest side
650 ft200 m

Elevation profile, south to north

14 mi south to north through Zebulon.

Topographic Map

Topographic elevation map of Pike County, Georgia, shaded from 650 ft on the southwest side to 1,271 ft on Indian Grave Mountain
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Georgia, United States
Population
20,669 2024 est.
Land area
216.1 sq mi + 3.3 sq mi water
Density
96 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Piedmont
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 6 towns in Pike County by typical elevation
  1. Williamson900 ft
  2. Zebulon830 ft
  3. Hilltop810 ft
  4. Concord810 ft
  5. Meansville800 ft
  6. Molena750 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.