Midville, GA Elevation & Topographic Map
Elevation
240 ft 75 m220 ft 70 m220 ft 65 m200 ft 60 m180 ft 55 m170 ft 50 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- City area
- Fades everything outside the official city limits (US Census).
Elevation Data
Midville sits at about 200 ft (60 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
200 ft 60 m
most residents: 190–220 ft
Lowest
170 ft 50 m
on the east side
Highest
240 ft 75 m
on the northwest side
Average
200 ft 60 m
all land inside city limits
Midville spans about 70 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 200 ft60 m |
| Highest point Inside city limits, on the northwest side | 240 ft75 m |
| Lowest point Inside city limits, on the east side | 170 ft50 m |
| Town center USGS map point for Midville | 190 ft60 m |
| Average of all land | 200 ft60 m |
Elevation profile, south to north
1.2 mi south to north through the town center.
Topographic Map
- Location
- City in Burke County, Georgia, United States
- Population
- 381 2024 est.
- Land area
- 2.0 sq mi
- Density
- 191 per sq mi
- Coordinates
- 32.8190° N, 82.2348° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Ogeechee River → Atlantic Ocean
- ZIP codes 1
- 30441
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Vidette360 ft
- Canoochee350 ft
- Louisville320 ft
- Swainsboro300 ft
- Twin City290 ft
- Garfield270 ft
- Bartow270 ft
- Summertown260 ft
- Wadley250 ft
- Midville200 ft
- Millen170 ft
Rankings by typical elevation
- Towns in Georgia550th highest of 676
- Towns in Burke Countylowest of 7
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.