Sonoma County, CA Elevation & Topographic Map

Topographic elevation map of Sonoma County, California, shaded from sea level on the Petaluma River to 4,730 ft on Cobb Mountain
Elevation
4,730 ft 1,445 m3,550 ft 1,080 m2,960 ft 900 m1,770 ft 540 m590 ft 180 m0 ft 0 m
Zoom in for contour lines
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Sonoma County averages about 730 ft (220 m) above sea level across all its land. Its ground runs from sea level on the Petaluma River to 4,730 ft on Cobb Mountain.

Average elevation
730 ft 220 m
all land inside the county
Highest
4,730 ft 1,440 m
on Cobb Mountain
Lowest
0 ft 0 m
at sea level on the Petaluma River

Sonoma County spans about 4,730 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land730 ft220 m
Highest point
Inside the county, on Cobb Mountain (3DEP terrain model; no NGS survey height)
4,730 ft1,440 m
Lowest point
Where the land meets the Petaluma River
0 ft0 m

Elevation profile, south to north

38 mi south to north through Santa Rosa.

Topographic Map

Topographic elevation map of Sonoma County, California, shaded from sea level on the Petaluma River to 4,730 ft on Cobb Mountain
County boundary (dashed) over shaded terrain, with contours every 200 ft (61 m).
Location
County in California, United States
Population
485,375 2024 est.
Land area
1,575.3 sq mi + 192.0 sq mi water
Density
308 per sq mi
Time zone
Pacific UTC−8 / −7
Landform region
Pacific Border
Drains to
Pacific Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 38 towns in Sonoma County by typical elevation
  1. Occidental630 ft
  2. Timber Cove620 ft
  3. Cazadero550 ft
  4. Kenwood420 ft
  5. Bodega360 ft
  6. Cloverdale350 ft
  7. Glen Ellen310 ft
  8. Forestville230 ft
  9. Geyserville230 ft
  10. Eldridge180 ft
  11. Bloomfield180 ft
  12. Bodega Bay180 ft
  13. Sebastopol170 ft
  14. Graton160 ft
  15. Sonoma State University150 ft
  16. Larkfield-Wikiup150 ft
  17. Carmet150 ft
  18. Santa Rosa150 ft
  19. Healdsburg150 ft
  20. Fetters Hot Springs-Agua Caliente140 ft
  21. Fulton140 ft
  22. Sea Ranch130 ft
  23. Guerneville130 ft
  24. Windsor130 ft
  25. Sereno del Mar130 ft
  26. Penngrove120 ft
  27. Boyes Hot Springs120 ft
  28. Petaluma Center110 ft
  29. Cotati110 ft
  30. Rohnert Park110 ft
  31. Jenner110 ft
  32. Temelec100 ft
  33. El Verano100 ft
  34. Valley Ford94 ft
  35. Sonoma77 ft
  36. Monte Rio70 ft
  37. Salmon Creek66 ft
  38. Petaluma45 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 2 arc-second (≈200 ft, 62 m) grid, coarsened from 1 arc-second so the whole area fits one run. Land means the boundary minus Census area water (on this grid, water areas of at least half a cell).
  • Highest and lowest: the highest land cell, re-read at 1 arc-second around the 25 highest grid cells; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell, re-read at 1 arc-second around the 25 lowest grid cells; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −8 ft at 38.1490° N, 122.4310° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.