Lassen County, CA Elevation & Topographic Map

Topographic elevation map of Lassen County, California, shaded from 3,250 ft on the northwest side to 8,740 ft on Hat Mountain
Elevation
8,740 ft 2,665 m7,370 ft 2,245 m6,680 ft 2,035 m5,310 ft 1,620 m3,930 ft 1,200 m3,250 ft 990 m
Zoom in for contour lines
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Lassen County averages about 5,390 ft (1,645 m) above sea level across all its land. Its ground runs from 3,250 ft on the northwest side to 8,740 ft on Hat Mountain.

Average elevation
5,390 ft 1,645 m
all land inside the county
Highest
8,740 ft 2,665 m
on Hat Mountain
Lowest
3,250 ft 990 m
on the northwest side

Lassen County spans about 5,490 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land5,390 ft1,645 m
Highest point
Inside the county, on Hat Mountain (3DEP terrain model; no NGS survey height)
8,740 ft2,665 m
Lowest point
Inside the county, on the northwest side
3,250 ft990 m

Elevation profile, south to north

61 mi south to north through Susanville.

Topographic Map

Topographic elevation map of Lassen County, California, shaded from 3,250 ft on the northwest side to 8,740 ft on Hat Mountain
County boundary (dashed) over shaded terrain, with contours every 500 ft (152 m).
Location
County in California, United States
Population
28,340 2024 est.
Land area
4,541.4 sq mi + 178.7 sq mi water
Density
6.2 per sq mi
Time zone
Pacific UTC−8 / −7
Landform regions
Basin and Range 88%, Cascade-sierra Mountains 12%
Drains to
Honey Lake basin (does not reach the sea) 33%, Pacific Ocean 29%, Closed basin (does not reach the sea) 25%
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 16 towns in Lassen County by typical elevation
  1. Madeline5,330 ft
  2. Stones Landing5,160 ft
  3. Spaulding5,140 ft
  4. Westwood5,090 ft
  5. Clear Creek4,950 ft
  6. Milford4,880 ft
  7. Janesville4,300 ft
  8. Doyle4,270 ft
  9. Little Valley4,230 ft
  10. Susanville4,180 ft
  11. Johnstonville4,150 ft
  12. Herlong4,130 ft
  13. Bieber4,130 ft
  14. Nubieber4,120 ft
  15. Litchfield4,080 ft
  16. Patton Village4,050 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 2 arc-second (≈200 ft, 62 m) grid, coarsened from 1 arc-second so the whole area fits one run. Land means the boundary minus Census area water (on this grid, water areas of at least half a cell).
  • Highest and lowest: the highest land cell, re-read at 1 arc-second around the 25 highest grid cells; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell, re-read at 1 arc-second around the 25 lowest grid cells; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 3,250 ft at 41.0454° N, 121.3296° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.