Belvedere, CA Elevation & Topographic Map

Topographic elevation map of Belvedere, California, shaded from sea level level on Richardson Bay to 360 ft at the foot of the San Miguel Hills
Elevation
360 ft 110 m270 ft 85 m230 ft 70 m140 ft 40 m45 ft 14 m0 ft 0 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
City area
Fades everything outside the official city limits (US Census).

Elevation Data

Belvedere sits at about 53 ft (16 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
53 ft 16 m
most residents: 6–210 ft
Lowest
0 ft 0 m
at sea level on Richardson Bay
Highest
360 ft 110 m
at the foot of the San Miguel Hills
Average
100 ft 30 m
all land inside city limits

Belvedere spans about 360 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
53 ft16 m
Highest point
Inside city limits, at the foot of the San Miguel Hills
360 ft110 m
Lowest point
Where the land meets Richardson Bay
0 ft0 m
Town center
USGS map point for Belvedere
60 ft18 m
Average of all land100 ft30 m
Nearest peak
Mount Tamalpais, 6.8 mi northwest of the city limits (NGS survey)
2,576 ft785 m

Elevation profile, south to north

1.8 mi south to north through the town center.

Topographic Map

Topographic elevation map of Belvedere, California, shaded from sea level level on Richardson Bay to 360 ft at the foot of the San Miguel Hills
City limits (dashed) over shaded terrain, with contours every 100 ft (30 m).
Location
City in Marin County, California, United States
Population
2,080 2024 est.
Land area
0.5 sq mi + 1.9 sq mi water
Density
4,008 per sq mi
Coordinates
37.8728° N, 122.4644° W
Time zone
Pacific UTC−8 / −7
Drains to
Pacific Ocean
ZIP codes 1
94920
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the city limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census city limits (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS and Watershed Boundary Dataset; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.