Alturas Indian Rancheria, CA Elevation & Topographic Map

Topographic elevation map of Alturas Indian Rancheria, California, shaded from 4,370 ft on the south side to 4,370 ft on the north side
Elevation
4,400 ft 1,340 m4,390 ft 1,340 m4,390 ft 1,340 m4,380 ft 1,335 m4,370 ft 1,335 m4,370 ft 1,330 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official reservation boundary (US Census).

Elevation Data

Alturas Indian Rancheria averages about 4,370 ft (1,330 m) above sea level across all its land. Its ground runs from 4,370 ft on the south side to 4,370 ft on the north side.

Average elevation
4,370 ft 1,330 m
all land inside the reservation
Highest
4,370 ft 1,335 m
on the north side
Lowest
4,370 ft 1,330 m
on the south side

Alturas Indian Rancheria is nearly flat: its ground varies by only about 0 ft, so the figures below sit close together.

FigureElevation
Average of all land4,370 ft1,330 m
Highest point
Inside the reservation, on the north side
4,370 ft1,335 m
Lowest point
Inside the reservation, on the south side
4,370 ft1,330 m

Topographic Map

Topographic elevation map of Alturas Indian Rancheria, California, shaded from 4,370 ft on the south side to 4,370 ft on the north side
Census reservation boundary (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
Reservation in California, United States (U.S. Census Bureau)
Population
3 2020 Census
Land area
under 0.1 sq mi
Density
77 per sq mi
Time zone
Pacific UTC−8 / −7
Landform region
Basin and Range
Drains to
Pacific Ocean
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census reservation boundary (TIGER/Line AIANNH, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Name: the Census Bureau's legal or statistical area name, as published; the nation's own name may differ.
  • Population: 2020 Census residents of the blocks inside the boundary.
  • Nearby Places: nearest tribal lands and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the reservation with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks); NOAA NGS survey heights; BTS time zones. All public domain.