Taylor, WY Elevation & Topographic Map

How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Taylor sits at about 6,420 ft (1,955 m) above sea level, the median height of all land inside the CDP boundary (too few residents to weight by).
Taylor spans about 1,300 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical (all land) Median of all land; too few residents to weight by | 6,420 ft1,955 m |
| Highest point Inside the CDP boundary, on the west side | 7,470 ft2,275 m |
| Lowest point Inside the CDP boundary, on the northeast side | 6,170 ft1,880 m |
| Average of all land | 6,500 ft1,980 m |
Elevation profile, west to east
1.8 mi west to east through the middle of Taylor.
Altitude Effects
What 6,420 ft means day to day, worked out from the typical elevation.
vs 212 °F at sea level; USDA: food takes longer to cook.
23.6 inHg (79.9 kPa): each breath holds 21% less air.
Air is still 21% oxygen, just thinner. Normal at the coast: 20.9%.
EPA: UV rises about 2% for every 1,000 ft.
Topographic Map
- Location
- Unincorporated community (census-designated place) in Lincoln County, Wyoming, United States
- Population
- 104 2020 Census
- Land area
- 3.0 sq mi
- Density
- 35 per sq mi
- Coordinates
- 42.0600° N, 110.9764° W
- Time zone
- Mountain UTC−7 / −6
- Landform region
- Middle Rocky Mountains
- Drains to
- Bear River → Great Salt Lake basin (does not reach the sea)
- ZIP codes 1
- 83114
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Kemmerer7,040 ft
- Taylor6,420 ft
- Cokeville6,200 ft
- Garden, UT6,120 ft
- Bennington, ID6,050 ft
- Garden City, UT5,980 ft
- Laketown, UT5,980 ft
- Bloomington, ID5,970 ft
- St. Charles, ID5,970 ft
- Montpelier, ID5,960 ft
- Paris, ID5,960 ft
Rankings by typical elevation
- Towns in Wyoming58th highest of 205
- Towns in Lincoln County8th highest of 24
Peaks and hills nearest, by height
- South Fork Mountain9,481 ft
- Sublette Mountain9,310 ft
- Red Mountain, Bear Lake County8,810 ft
- Rex Peak8,000 ft
- Pine Spring Ridge7,882 ft
How we measure
- Typical elevation: the median height of all land inside the CDP boundary; too few residents live here to weight by people.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Altitude effects: standard-atmosphere formulas applied to the typical elevation; UV from EPA's rule of thumb (about 2% per 1,000 ft).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Taylor is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.