Campbell County, WY Elevation & Topographic Map

Topographic elevation map of Campbell County, Wyoming, shaded from 3,340 ft on the north side to 6,050 ft on North Butte
Elevation
6,050 ft 1,845 m5,380 ft 1,640 m5,040 ft 1,535 m4,360 ft 1,330 m3,680 ft 1,120 m3,340 ft 1,020 m
Zoom in for contour lines
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Campbell County averages about 4,480 ft (1,365 m) above sea level across all its land. Its ground runs from 3,340 ft on the north side to 6,050 ft on North Butte.

Average elevation
4,480 ft 1,365 m
all land inside the county
Highest
6,050 ft 1,845 m
on North Butte
Lowest
3,340 ft 1,020 m
on the north side

Campbell County spans about 2,710 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land4,480 ft1,365 m
Highest point
Inside the county, on North Butte
6,050 ft1,845 m
Lowest point
Inside the county, on the north side
3,340 ft1,020 m

Elevation profile, south to north

104 mi south to north through Gillette.

Topographic Map

Topographic elevation map of Campbell County, Wyoming, shaded from 3,340 ft on the north side to 6,050 ft on North Butte
County boundary (dashed) over shaded terrain, with contours every 500 ft (152 m).
Location
County in Wyoming, United States
Population
47,946 2024 est.
Land area
4,802.1 sq mi + 4.3 sq mi water
Density
10.0 per sq mi
Time zone
Mountain UTC−7 / −6
Landform region
Great Plains
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 3 towns in Campbell County by typical elevation
  1. Wright4,950 ft
  2. Sleepy Hollow4,590 ft
  3. Gillette4,560 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 2 arc-second (≈200 ft, 62 m) grid, coarsened from 1 arc-second so the whole area fits one run. Land means the boundary minus Census area water (on this grid, water areas of at least half a cell).
  • Highest and lowest: the highest land cell, re-read at 1 arc-second around the 25 highest grid cells. Lowest: the lowest land cell, re-read at 1 arc-second around the 25 lowest grid cells; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.