Belfair, WA Elevation & Topographic Map

Topographic elevation map of Belfair, Washington, shaded from sea level level on Lynch Cove to 500 ft on the west side
Elevation
500 ft 155 m380 ft 115 m310 ft 95 m190 ft 60 m63 ft 19 m0 ft 0 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Belfair sits at about 200 ft (60 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
200 ft 60 m
most residents: 28–300 ft
Lowest
0 ft 0 m
at sea level on Lynch Cove
Highest
500 ft 155 m
on the west side
Average
180 ft 55 m
all land inside the CDP boundary

Belfair spans about 500 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
200 ft60 m
Highest point
Inside the CDP boundary, on the west side
500 ft155 m
Lowest point
Where the land meets Lynch Cove
0 ft0 m
Town center
USGS map point for Belfair
47 ft14 m
Airport (PWT)
FAA airport elevation, the highest point of its runways, 1.9 mi northeast of the CDP boundary
444 ft135 m
Average of all land180 ft55 m
Nearest peak
Gold Mountain, Kitsap County, 5.0 mi north of the CDP boundary
1,760 ft535 m

Elevation profile, west to east

3.4 mi west to east through the town center.

Topographic Map

Topographic elevation map of Belfair, Washington, shaded from sea level level on Lynch Cove to 500 ft on the west side
CDP boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
Unincorporated community (census-designated place) in Mason County, Washington, United States
Population
4,279 2020 Census
Land area
7.4 sq mi + 0.8 sq mi water
Density
581 per sq mi
Coordinates
47.4506° N, 122.8274° W
Time zone
Pacific UTC−8 / −7
Landform region
Pacific Border
Drains to
Strait of Juan de Fuca
Airport
Bremerton Ntl (PWT) 444 ft
ZIP codes 1
98528
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

  1. Purdy330 ft
  2. Bethel310 ft
  3. Burley280 ft
  4. Stansberry Lake250 ft
  5. Wauna240 ft
  6. Allyn200 ft
  7. Belfair200 ft
  8. Key Center190 ft
  9. Vaughn120 ft
  10. Gorst110 ft
  11. Grapeview65 ft

Rankings by typical elevation

Peaks and hills nearest, by height

  • The Brothers6,840 ft
  • Mount Washington6,210 ft
  • Mount Jupiter5,670 ft
  • Dow Mountain2,520 ft
  • Gold Mountain, Kitsap County1,760 ft
How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Belfair is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones; NOAA NGS survey heights. All public domain.