Dickenson County, VA Elevation & Topographic Map

Topographic elevation map of Dickenson County, Virginia, shaded from 850 ft on the north side to 3,110 ft on the northwest side
Elevation
3,110 ft 950 m2,550 ft 775 m2,260 ft 690 m1,700 ft 520 m1,140 ft 345 m850 ft 260 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Dickenson County averages about 1,950 ft (595 m) above sea level across all its land. Its ground runs from 850 ft on the north side to 3,110 ft on the northwest side.

Average elevation
1,950 ft 595 m
all land inside the county
Highest
3,110 ft 950 m
on the northwest side
Lowest
850 ft 260 m
on the north side

Dickenson County spans about 2,260 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land1,950 ft595 m
Highest point
Inside the county, on the northwest side
3,110 ft950 m
Lowest point
Inside the county, on the north side
850 ft260 m

Elevation profile, south to north

15 mi south to north through Clintwood.

Topographic Map

Topographic elevation map of Dickenson County, Virginia, shaded from 850 ft on the north side to 3,110 ft on the northwest side
County boundary (dashed) over shaded terrain, with contours every 200 ft (61 m).
Location
County in Virginia, United States
Population
13,411 2024 est.
Land area
330.4 sq mi + 3.1 sq mi water
Density
41 per sq mi
Time zone
Eastern UTC−5 / −4
Landform region
Appalachian Plateaus 90%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 5 towns in Dickenson County by typical elevation
  1. Dante partly2,190 ft
  2. Clintwood1,870 ft
  3. Haysi1,800 ft
  4. Breaks partly1,570 ft
  5. Clinchco1,430 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.