Town of Belle Haven, VA Elevation & Topographic Map

Elevation
40 ft 12 m30 ft 9 m25 ft 8 m15 ft 5 m5 ft 2 m0 ft 0 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Town of Belle Haven sits at about 32 ft (10 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
32 ft 10 m
most residents: 29–37 ft
Lowest
0 ft 0 m
at sea level on Occohannock Creek
Highest
40 ft 12 m
on the northeast side
Average
27 ft 8 m
all land inside town limits
Town of Belle Haven spans about 40 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 32 ft10 m |
| Highest point Inside town limits, on the northeast side | 40 ft12 m |
| Lowest point Where the land meets Occohannock Creek | 0 ft0 m |
| Town center USGS map point for Town of Belle Haven | 35 ft11 m |
| Airport (MFV) FAA airport elevation, the highest point of its runways, 6.4 mi northeast of the town limits | 48 ft15 m |
| Average of all land | 27 ft8 m |
Elevation profile, west to east
1.2 mi west to east through the town center.
Topographic Map
- Location
- Town in Accomack and Northampton counties, Virginia, United States
- Population
- 536 2024 est.
- Land area
- 1.5 sq mi + 0.1 sq mi water
- Density
- 350 per sq mi
- Coordinates
- 37.5543° N, 75.8205° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Atlantic Ocean
- Airport
- Accomack County (MFV) 48 ft
- ZIP codes 1
- 23306
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Keller38 ft
- Boston35 ft
- Painter35 ft
- Mappsburg35 ft
- Savage Town34 ft
- Pungoteague34 ft
- Exmore33 ft
- Town of Belle Haven32 ft
- Cats Bridge24 ft
- Willis Wharf24 ft
- Quinby6 ft
Rankings by typical elevation
- Towns in Virginia637th highest of 700
- Towns in Accomack County22nd highest of 49
Peaks and hills nearest, by height
- Italian Hill20 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −2 ft at 37.5696° N, 75.8290° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.