Lamoille County, VT Elevation & Topographic Map
Elevation
4,400 ft 1,340 m3,400 ft 1,035 m2,910 ft 885 m1,920 ft 585 m920 ft 280 m430 ft 130 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- County area
- Fades everything outside the official county boundary (US Census).
Elevation Data
Lamoille County averages about 1,300 ft (395 m) above sea level across all its land. Its ground runs from 430 ft on the northwest side to 4,395 ft on Mount Mansfield.
Average elevation
1,300 ft 395 m
all land inside the county
Highest
4,395 ft 1,340 m
on Mount Mansfield
Lowest
430 ft 130 m
on the northwest side
Lamoille County spans about 3,970 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Average of all land | 1,300 ft395 m |
| Highest point Inside the county, on Mount Mansfield (NGS survey height) | 4,395 ft1,340 m |
| Lowest point Inside the county, on the northwest side | 430 ft130 m |
Elevation profile, west to east
22 mi west to east through Morristown.
Topographic Map
- Location
- County in Vermont, United States
- Population
- 26,248 2024 est.
- Land area
- 461.3 sq mi + 4.9 sq mi water
- Density
- 57 per sq mi
- Time zone
- Eastern UTC−5 / −4
- Landform region
- New England 99%
- Drains to
- Canada
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Neighboring counties sharing a border, by average
- Caledonia County1,370 ft
- Washington County1,360 ft
- Orleans County1,340 ft
- Lamoille County1,300 ft
- Chittenden County760 ft
- Franklin County690 ft
Rankings by average elevation
- Counties in Vermont7th highest of 14
- Counties in the United States1,004th highest of 3,151
Peaks and hills highest inside
- The Nose4,062 ft
- Bear Head3,950 ft
- Sterling Mountain3,700 ft
- Madonna Peak3,650 ft
- Laraway Mountain2,796 ft
All 16 towns in Lamoille County by typical elevation
- Elmore1,410 ft
- Belvidere1,380 ft
- Eden1,250 ft
- Waterville1,220 ft
- Wolcott1,100 ft
- Stowe980 ft
- North Hyde Park870 ft
- Hyde Park860 ft
- Morristown750 ft
- Johnson720 ft
- Cambridge700 ft
- Morrisville670 ft
- Village of Hyde Park670 ft
- Village of Johnson610 ft
- Jeffersonville490 ft
- Village of Cambridge450 ft
How we measure
- Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
- Highest and lowest: the highest land cell; it is a named summit, so its height is the peak method: the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a survey mark sits within 160 ft (50 m) of it. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
- Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.