Benton County, TN Elevation & Topographic Map

Topographic elevation map of Benton County, Tennessee, shaded from 290 ft on the south side to 674 ft on Ward Hill
Elevation
670 ft 205 m580 ft 175 m530 ft 160 m440 ft 135 m340 ft 105 m290 ft 90 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
County area
Fades everything outside the official county boundary (US Census).

Elevation Data

Benton County averages about 480 ft (145 m) above sea level across all its land. Its ground runs from 290 ft on the south side to 674 ft on Ward Hill.

Average elevation
480 ft 145 m
all land inside the county
Highest
674 ft 205 m
on Ward Hill
Lowest
290 ft 90 m
on the south side

Benton County spans about 380 ft of height, so no single spot tells the whole story. The ruler shows where most of its land lies, and where the other numbers you'll see come from.

FigureElevation
Average of all land480 ft145 m
Highest point
Inside the county, on Ward Hill (NGS survey height)
674 ft205 m
Lowest point
Inside the county, on the south side
290 ft90 m

Elevation profile, south to north

35 mi south to north through Camden.

Topographic Map

Topographic elevation map of Benton County, Tennessee, shaded from 290 ft on the south side to 674 ft on Ward Hill
County boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
County in Tennessee, United States
Population
16,173 2024 est.
Land area
394.3 sq mi + 41.9 sq mi water
Density
41 per sq mi
Time zone
Central UTC−6 / −5
Landform regions
Coastal Plain 54%, Interior Low Plateaus 46%
Drains to
Gulf of America
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS

Nearby Places

All 4 towns in Benton County by typical elevation
  1. Camden450 ft
  2. Holladay450 ft
  3. Big Sandy400 ft
  4. Eva390 ft
How we measure
  • Average: every USGS 3DEP bare-earth cell of land inside the Census county boundary (TIGER/Line, Jan 1 2026), weighted equally, on a 1 arc-second (≈100 ft, 30 m) grid. Land means the boundary minus Census area water.
  • Highest and lowest: the highest land cell. Lowest: the lowest land cell; coastal ground within 3 ft (1 m) of named tidal water counts as sea level.
  • Highest ground: the single highest 3DEP cell, 670 ft at 35.8749° N, 87.9593° W, has no federal (GNIS) summit name within 980 ft (300 m), so the high point shown is the highest of the 25 highest cells with a GNIS summit within 1,640 ft (500 m).
  • Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, 220 ft at 35.8643° N, 88.1188° W, is in such a hollow or patch and is not counted.
  • Nearby Places: neighboring counties and rankings use each one's average elevation, on its own grid, the same figure its page shows. Peaks and hills: the highest summits inside the county with at least 980 ft (300 m) of prominence, then the highest federal (GNIS) summits inside it when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Towns: each town's typical elevation (population-weighted median of its own 2020 blocks at 1 arc-second); a town is listed when any of its 2020 residents live in the county.
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (TIGER boundaries and water, 2020 blocks, 2024 population estimates, county adjacency); NOAA NGS survey heights; BTS time zones. All public domain.