Reliance, SD Elevation & Topographic Map

Elevation
1,800 ft 550 m1,780 ft 545 m1,780 ft 540 m1,760 ft 535 m1,750 ft 535 m1,740 ft 530 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Reliance sits at about 1,780 ft (540 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,780 ft 540 m
most residents: 1,780–1,790 ft
Lowest
1,740 ft 530 m
on the east side
Highest
1,800 ft 550 m
near the middle
Average
1,780 ft 540 m
all land inside town limits
Reliance spans about 60 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,780 ft540 m |
| Highest point Inside town limits, near the middle | 1,800 ft550 m |
| Lowest point Inside town limits, on the east side | 1,740 ft530 m |
| Town center USGS map point for Reliance | 1,790 ft545 m |
| Average of all land | 1,780 ft540 m |
Elevation profile, west to east
1.1 mi west to east through the town center.
Topographic Map
- Location
- Town in Lyman County, South Dakota, United States
- Population
- 127 2024 est.
- Land area
- 1.1 sq mi + 0.1 sq mi water
- Density
- 117 per sq mi
- Coordinates
- 43.8789° N, 99.6032° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Great Plains
- Drains to
- Missouri River → Mississippi River → Gulf of America
- ZIP codes 1
- 57569
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Reliance1,780 ft
- West Brule1,770 ft
- Rex Township1,770 ft
- Bailey Township1,730 ft
- Kennebec1,690 ft
- Chamberlain Township1,680 ft
- Oacoma Township1,620 ft
- Lower Brule1,470 ft
- Fort Thompson1,440 ft
- Chamberlain1,440 ft
- Oacoma1,400 ft
Rankings by typical elevation
- Towns in South Dakota466th highest of 1,383
- Towns in Lyman County6th highest of 13
Peaks and hills nearest, by height
- Medicine Butte2,257 ft
- Red Butte, Lyman County1,970 ft
- Lewis Hill1,820 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.