Jamesville Township, SD Elevation & Topographic Map

Elevation
1,470 ft 450 m1,400 ft 425 m1,360 ft 415 m1,280 ft 390 m1,200 ft 365 m1,160 ft 355 m
Contours every 200 ft, bold every 1,000 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Township area
- Fades everything outside the official township boundaries (US Census).
Elevation Data
Jamesville Township sits at about 1,210 ft (370 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,210 ft 370 m
most residents: 1,210–1,350 ft
Lowest
1,160 ft 355 m
on the southeast side
Highest
1,470 ft 450 m
on the northeast side
Average
1,300 ft 395 m
all land inside township boundaries
Jamesville Township spans about 310 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,210 ft370 m |
| Highest point Inside township boundaries, on the northeast side | 1,470 ft450 m |
| Lowest point Inside township boundaries, on the southeast side | 1,160 ft355 m |
| Town center USGS map point for Jamesville Township | 1,180 ft360 m |
| Average of all land | 1,300 ft395 m |
Elevation profile, south to north
6.0 mi south to north through the town center.
Topographic Map
- Location
- Township in Yankton County, South Dakota, United States
- Population
- 216 2024 est.
- Land area
- 36.2 sq mi
- Density
- 6.0 per sq mi
- Coordinates
- 43.1028° N, 97.4837° W
- Time zone
- Central UTC−6 / −5
- Landform region
- Central Lowland
- Drains to
- Missouri River → Mississippi River → Gulf of America
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Salem Township, Turner County1,620 ft
- Molan Township1,430 ft
- Mayfield Township1,420 ft
- Lesterville1,390 ft
- Utica1,370 ft
- Menno1,330 ft
- Walshtown Township1,310 ft
- Jamesville Township1,210 ft
- Sweet Township1,200 ft
- Maxwell Colony1,190 ft
- Jamesville Colony1,190 ft
Rankings by typical elevation
- Towns in South Dakota1,325th highest of 1,383
- Towns in Yankton County11th highest of 16
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the township boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census township boundaries (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas); BTS time zones. All public domain.