Luray, SC Elevation & Topographic Map
Elevation
140 ft 45 m130 ft 40 m130 ft 40 m120 ft 35 m110 ft 35 m110 ft 35 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Luray sits at about 140 ft (40 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
140 ft 40 m
most residents: 130–140 ft
Lowest
110 ft 35 m
on the southeast side
Highest
140 ft 45 m
on the northeast side
Average
140 ft 40 m
all land inside town limits
Luray spans about 30 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 140 ft40 m |
| Highest point Inside town limits, on the northeast side | 140 ft45 m |
| Lowest point Inside town limits, on the southeast side | 110 ft35 m |
| Town center USGS map point for Luray | 140 ft40 m |
| Average of all land | 140 ft40 m |
Topographic Map
- Location
- Town in Hampton County, South Carolina, United States
- Population
- 99 2024 est.
- Land area
- 1.0 sq mi
- Density
- 99 per sq mi
- Coordinates
- 32.8138° N, 81.2398° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Coosawhatchie River → Atlantic Ocean
- ZIP codes 1
- 29932
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
Rankings by typical elevation
- Towns in South Carolina336th highest of 475
- Towns in Hampton Countyhighest of 9
Peaks and hills nearest, by height
- Gravel Hill250 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones. All public domain.