Eureka Mill, SC Elevation & Topographic Map

Topographic elevation map of Eureka Mill, South Carolina, shaded from 500 ft on the southeast side to 600 ft on the south side
Elevation
600 ft 185 m580 ft 175 m560 ft 170 m540 ft 165 m510 ft 155 m500 ft 150 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Eureka Mill sits at about 540 ft (165 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
540 ft 165 m
most residents: 530–550 ft
Lowest
500 ft 150 m
on the southeast side
Highest
600 ft 185 m
on the south side
Average
550 ft 165 m
all land inside the CDP boundary

Eureka Mill spans about 100 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
540 ft165 m
Highest point
Inside the CDP boundary, on the south side
600 ft185 m
Lowest point
Inside the CDP boundary, on the southeast side
500 ft150 m
Town center
USGS map point for Eureka Mill
520 ft160 m
Airport (DCM)
FAA airport elevation, the highest point of its runways, 4.1 mi north of the CDP boundary
657 ft200 m
Average of all land550 ft165 m

Elevation profile, south to north

1.0 mi south to north through the town center.

Topographic Map

Topographic elevation map of Eureka Mill, South Carolina, shaded from 500 ft on the southeast side to 600 ft on the south side
CDP boundary (dashed) over shaded terrain, with contours every 10 ft (3 m).
Location
Unincorporated community (census-designated place) in Chester County, South Carolina, United States
Population
1,415 2020 Census
Land area
1.3 sq mi
Density
1,125 per sq mi
Coordinates
34.7176° N, 81.1937° W
Time zone
Eastern UTC−5 / −4
Landform region
Piedmont
Drains to
Wateree River → Santee River → Atlantic Ocean
Airport
Chester Catawba Regional (DCM) 657 ft
ZIP codes 1
29706
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

  1. Lowrys680 ft
  2. McConnells660 ft
  3. Lesslie650 ft
  4. Rock Hill620 ft
  5. Richburg560 ft
  6. Eureka Mill540 ft
  7. Chester530 ft
  8. Fort Lawn510 ft
  9. Carlisle470 ft
  10. Gayle Mill470 ft
  11. Lockhart460 ft

Rankings by typical elevation

Peaks and hills nearest, by height

  • Bulls Hill740 ft
  • Long Hill, York County700 ft
How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Eureka Mill is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.