Coward, SC Elevation & Topographic Map

Elevation
110 ft 30 m97 ft 30 m93 ft 28 m85 ft 26 m77 ft 23 m73 ft 22 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town limits (US Census).
Elevation Data
Coward sits at about 83 ft (25 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
83 ft 25 m
most residents: 78–88 ft
Lowest
72 ft 22 m
on the northeast side
Highest
100 ft 30 m
on the west side
Average
85 ft 26 m
all land inside town limits
Coward is nearly flat: its ground varies by only about 28 ft, so the figures below sit close together.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 83 ft25 m |
| Highest point Inside town limits, on the west side | 100 ft30 m |
| Lowest point Inside town limits, on the northeast side | 72 ft22 m |
| Town center USGS map point for Coward | 82 ft25 m |
| Airport (FLO) FAA airport elevation, the highest point of its runways, 13 mi north of the town limits | 147 ft45 m |
| Average of all land | 85 ft26 m |
Topographic Map
- Location
- Town in Florence County, South Carolina, United States
- Population
- 715 2024 est.
- Land area
- 3.2 sq mi
- Density
- 221 per sq mi
- Coordinates
- 33.9732° N, 79.7470° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Coastal Plain
- Drains to
- Great Pee Dee River → Atlantic Ocean
- Airport
- Florence Regional (FLO) 147 ft
- ZIP codes 1
- 29530
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Timmonsville150 ft
- Shiloh130 ft
- Florence120 ft
- Quinby120 ft
- Olanta110 ft
- Turbeville110 ft
- Danwood110 ft
- Scranton85 ft
- Pamplico83 ft
- Coward83 ft
- Lake City76 ft
Rankings by typical elevation
- Towns in South Carolina387th highest of 475
- Towns in Florence County8th highest of 10
Peaks and hills nearest, by height
- Heaven Hill34 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town limits, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town limits (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.