South Kingstown, RI Elevation & Topographic Map
Elevation
320 ft 95 m240 ft 75 m200 ft 60 m120 ft 35 m40 ft 12 m0 ft 0 m
Contours every 500 ft, bold every 2,500 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Town area
- Fades everything outside the official town boundaries (US Census).
Elevation Data
South Kingstown sits at about 110 ft (35 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
110 ft 35 m
most residents: 28–190 ft
Lowest
0 ft 0 m
at sea level on the Atlantic Ocean
Highest
320 ft 95 m
on Mount Pleasant
Average
100 ft 30 m
all land inside town boundaries
South Kingstown spans about 320 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 110 ft35 m |
| Highest point Inside town boundaries, on Mount Pleasant | 320 ft95 m |
| Lowest point Where the land meets the Atlantic Ocean | 0 ft0 m |
| Average of all land | 100 ft30 m |
Elevation profile, south to north
8.9 mi south to north through the middle of South Kingstown.
Topographic Map
- Location
- Town in Washington County, Rhode Island, United States
- Population
- 32,094 2024 est.
- Land area
- 56.4 sq mi + 23.3 sq mi water
- Density
- 569 per sq mi
- Coordinates
- 41.4533° N, 71.5247° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- New England
- Drains to
- Atlantic Ocean
- ZIP codes 4
- 02874 02879 02881 02892
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS
Nearby Places
Nearby towns by typical elevation
- Exeter260 ft
- Richmond160 ft
- Kingston130 ft
- South Kingstown110 ft
- Charlestown93 ft
- Carolina87 ft
- Wakefield-Peace Dale69 ft
- Jamestown53 ft
- North Kingstown51 ft
- Narragansett Pier43 ft
- Narragansett35 ft
Rankings by typical elevation
- Towns in Rhode Island33rd highest of 63
- Towns in Washington County7th highest of 21
Peaks and hills nearest, by height
- Broad Hill221 ft
- Great Neck180 ft
- Jumping Hill92 ft
- Green Hill72 ft
- Blackberry Hill66 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the town boundaries, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census town boundaries (TIGER, Jan 1 2026).
- Pits: the lowest point is the lowest ground outside closed hollows (quarry floors, mine pits, terrain-model artifacts): any hollow under 0.4 sq mi (1 km²), and any hollow under 2 sq mi (5 km²) whose floor is more than 100 ft (30 m) below its rim; and outside patches below sea level of under 0.4 sq mi (1 km²). The single lowest 3DEP cell, −4 ft at 41.3649° N, 71.6104° W, is in such a hollow or patch and is not counted; this coastal land's lowest point is sea level on the coast.
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, 2024 population estimates, Gazetteer areas, ZIP code areas); BTS time zones; NOAA NGS survey heights. All public domain.