Mount Royal, PA Elevation & Topographic Map

Topographic elevation map of Mount Royal, Pennsylvania, shaded from 340 ft on the northwest side to 650 ft at the foot of the Conewago Mountains
Elevation
650 ft 200 m570 ft 175 m530 ft 165 m460 ft 140 m380 ft 115 m340 ft 105 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Mount Royal sits at about 510 ft (155 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
510 ft 155 m
most residents: 390–510 ft
Lowest
340 ft 105 m
on the northwest side
Highest
650 ft 200 m
at the foot of the Conewago Mountains
Average
470 ft 140 m
all land inside the CDP boundary

Mount Royal spans about 310 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
510 ft155 m
Highest point
Inside the CDP boundary, at the foot of the Conewago Mountains
650 ft200 m
Lowest point
Inside the CDP boundary, on the northwest side
340 ft105 m
Town center
USGS map point for Mount Royal
450 ft135 m
Airport (MDT)
FAA airport elevation, the highest point of its runways, 12 mi northeast of the CDP boundary
310 ft94 m
Average of all land470 ft140 m

Elevation profile, west to east

1.0 mi west to east through the town center.

Topographic Map

Topographic elevation map of Mount Royal, Pennsylvania, shaded from 340 ft on the northwest side to 650 ft at the foot of the Conewago Mountains
CDP boundary (dashed) over shaded terrain, with contours every 20 ft (6 m).
Location
Unincorporated community (census-designated place) in York County, Pennsylvania, United States
Population
333 2020 Census
Land area
0.9 sq mi
Density
375 per sq mi
Coordinates
40.0393° N, 76.8878° W
Time zone
Eastern UTC−5 / −4
Landform region
Piedmont
Drains to
Susquehanna River → Atlantic Ocean
Airport
Harrisburg International (MDT) 310 ft
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Mount Royal is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas); FAA airport data; BTS time zones. All public domain.