Leamersville, PA Elevation & Topographic Map

Elevation
1,120 ft 340 m1,090 ft 330 m1,070 ft 325 m1,040 ft 315 m1,010 ft 305 m990 ft 300 m
Contours every 40 ft, bold every 200 ft
USGS 3DEP · U.S. Census Bureau
How to use this mapviews, tools and data
- Elevation
- Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
- Satellite
- A 2016 satellite photo at 33 ft (10 m) detail; contours off.
- 3D
- Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
- Click or tap anywhere
- The exact elevation of that spot in ft and m.
- Measure
- Pick two points for the climb, descent and grade along a straight line.
- Area
- Fades everything outside the official CDP boundary (US Census).
Elevation Data
Leamersville sits at about 1,000 ft (305 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.
Typical elevation
1,000 ft 305 m
most residents: 990–1,040 ft
Lowest
990 ft 300 m
on the north side
Highest
1,120 ft 340 m
at the foot of the Tussey Mountain
Average
1,030 ft 315 m
all land inside the CDP boundary
Leamersville spans about 130 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.
| Figure | Elevation |
|---|---|
| Typical Where people live: half of residents higher, half lower | 1,000 ft305 m |
| Highest point Inside the CDP boundary, at the foot of the Tussey Mountain | 1,120 ft340 m |
| Lowest point Inside the CDP boundary, on the north side | 990 ft300 m |
| Town center USGS map point for Leamersville | 1,000 ft305 m |
| Airport (AOO) FAA airport elevation, the highest point of its runways, 7.5 mi southeast of the CDP boundary | 1,503 ft458 m |
| Average of all land | 1,030 ft315 m |
| Nearest peak Loop Mountain, 3.4 mi east of the CDP boundary | 2,500 ft765 m |
Topographic Map
- Location
- Unincorporated community (census-designated place) in Blair County, Pennsylvania, United States
- Population
- 96 2020 Census
- Land area
- 0.1 sq mi
- Density
- 676 per sq mi
- Coordinates
- 40.3684° N, 78.4270° W
- Time zone
- Eastern UTC−5 / −4
- Landform region
- Valley and Ridge
- Drains to
- Frankstown Branch Juniata River → Juniata River → Susquehanna River → Atlantic Ocean
- Airport
- Altoona/Blair County (AOO) 1,503 ft
- ZIP codes 1
- 16635
⤓ Download this map
WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.
Sources: U.S. Census Bureau, USGS, FAA
Nearby Places
Nearby towns by typical elevation
- Smith Corner1,340 ft
- Roaring Spring1,270 ft
- Puzzletown1,250 ft
- Freedom Township1,120 ft
- Blair Township1,080 ft
- McKee1,050 ft
- Newry1,050 ft
- East Freedom1,020 ft
- Vicksburg, Blair County1,020 ft
- Leamersville1,000 ft
- Brooks Mill990 ft
Rankings by typical elevation
- Towns in Pennsylvania1,726th highest of 3,545
- Towns in Blair County83rd highest of 108
Peaks and hills nearest, by height
- Martin Hill2,770 ft
- Wills Mountain2,770 ft
- Brush Mountain2,580 ft
- Loop Mountain2,500 ft
- Rays Hill2,440 ft
How we measure
- Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
- Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
- Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
- Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
- Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
- Leamersville is an unincorporated community; figures cover the census-designated place, a statistical area.
- Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.