Colver, PA Elevation & Topographic Map

Topographic elevation map of Colver, Pennsylvania, shaded from 1,790 ft on the west side to 2,320 ft on the southeast side
Elevation
2,320 ft 710 m2,190 ft 665 m2,120 ft 645 m1,990 ft 605 m1,860 ft 565 m1,790 ft 545 m
Contours every 100 ft, bold every 500 ft
USGS 3DEP · U.S. Census Bureau
⤓ Download this map
How to use this mapviews, tools and data
Elevation
Ground colored by height from green (lowest) to white (highest), with contour lines every 40–500 ft (USGS data).
Satellite
A 2016 satellite photo at 33 ft (10 m) detail; contours off.
3D
Tilt and turn the terrain; hills are raised 1.5×, or set ×1 for true height.
Click or tap anywhere
The exact elevation of that spot in ft and m.
Measure
Pick two points for the climb, descent and grade along a straight line.
Area
Fades everything outside the official CDP boundary (US Census).

Elevation Data

Colver sits at about 2,170 ft (660 m) above sea level, worked out from 2020 Census block heights on USGS 3DEP, weighted by residents.

Typical elevation
2,170 ft 660 m
most residents: 2,010–2,210 ft
Lowest
1,790 ft 545 m
on the west side
Highest
2,320 ft 710 m
on the southeast side
Average
2,080 ft 635 m
all land inside the CDP boundary

Colver spans about 530 ft of height, so no single spot tells the whole story. The ruler shows where its people live, and where the other numbers you'll see come from.

FigureElevation
Typical
Where people live: half of residents higher, half lower
2,170 ft660 m
Highest point
Inside the CDP boundary, on the southeast side
2,320 ft710 m
Lowest point
Inside the CDP boundary, on the west side
1,790 ft545 m
Town center
USGS map point for Colver
2,170 ft660 m
Airport (9G8)
FAA airport elevation, the highest point of its runways, 4.7 mi south of the CDP boundary
2,099 ft640 m
Average of all land2,080 ft635 m

Elevation profile, west to east

1.0 mi west to east through the town center.

Topographic Map

Topographic elevation map of Colver, Pennsylvania, shaded from 1,790 ft on the west side to 2,320 ft on the southeast side
CDP boundary (dashed) over shaded terrain, with contours every 40 ft (12 m).
Location
Unincorporated community (census-designated place) in Cambria County, Pennsylvania, United States
Population
904 2020 Census
Land area
1.3 sq mi
Density
715 per sq mi
Coordinates
40.5434° N, 78.7878° W
Time zone
Eastern UTC−5 / −4
Landform region
Appalachian Plateaus
Drains to
Ohio River → Mississippi River → Gulf of America
Airport
Ebensburg (9G8) 2,099 ft
ZIP codes 1
15927
⤓ Download this map

WebP, 1200 × 900. Free to use: credit “ElevationOf.com” with a link to this page.

Sources: U.S. Census Bureau, USGS, FAA

Nearby Places

Nearby towns by typical elevation

  1. Colver2,170 ft
  2. Ebensburg2,100 ft
  3. Cambria Township2,090 ft
  4. Elmora2,070 ft
  5. Revloc2,010 ft
  6. Nicktown1,940 ft
  7. Barr Township1,820 ft
  8. Nanty-Glo1,800 ft
  9. Belsano1,800 ft
  10. Blacklick Township1,770 ft
  11. Twin Rocks1,710 ft

Rankings by typical elevation

Peaks and hills nearest, by height

  • Martin Hill2,770 ft
  • Wills Mountain2,770 ft
  • Brush Mountain2,580 ft
  • Loop Mountain2,500 ft
  • Rays Hill2,440 ft
How we measure
  • Typical elevation: the population-weighted median: every 2020 Census block inside the CDP boundary, at its USGS 3DEP height, weighted by the people who live there. Half of residents live higher, half lower.
  • Lowest, highest, average: USGS 3DEP bare-earth heights on a 1 arc-second (≈100 ft, 30 m) grid, land only, inside the Census CDP boundary (TIGER, Jan 1 2026).
  • Nearby Places: nearby towns and rankings use each town's typical elevation, so every town is compared like for like. Rankings count every city, town, township and census-designated place, including places inside a town. Peaks and hills: the nearest summits with at least 980 ft (300 m) of prominence within 62 mi (100 km), then federal (GNIS) summits within 16 mi (25 km) when there are fewer than 5; each is the 3DEP top on a ~7 ft (2 m) window, or the NGS published height when a usable survey mark sits within 160 ft (50 m) of it (shown as published).
  • Rounding: computed heights are rounded to 10 ft (5 m), or to 1 ft (1 m) under 100 ft; 3DEP is good to about a meter, not a foot. Published figures (FAA airport elevation, NGS survey heights) are shown as their publisher gives them.
  • Datum: North American Vertical Datum of 1988 (NAVD 88). NGS plans to replace NAVD 88 with a new datum (NAPGD2022); heights will then shift slightly.
  • Colver is an unincorporated community; figures cover the census-designated place, a statistical area.
  • Sources: USGS 3DEP, GNIS, Watershed Boundary Dataset and physiographic provinces; U.S. Census Bureau (boundaries, 2020 blocks, Gazetteer areas, ZIP code areas); FAA airport data; BTS time zones. All public domain.